You are not logged in!
To save a listing, you need to be logged in.
Parasound 1205A Power Amp
I am located in Antelope Valley Palmdale/Lancaster area. You can listen to the amp in action but it will have to be at your house as I dont have anything to hook it up to. Parasound 1205A 5 Channel Power Amp outputs 140 watts per channel. Asking $140 OBO no lowballing and no trading. Still sells for $600-$750. It is used and has some scratches on it. Reason im asking so little for it is it needs some work done to it. The Amp STILL works as it is. I have watched 4 movies using it before i decided to have it checked out by an authorized parasound repair shop. It needs 2-3 large capacitors replaced and 1-2 small capacitors, the center channel is not working. This is a 5 channel amp so currently only 4 channels work.To replace all the capacitors it will cost around $90-$110. This is for Panasonic brand capacitors you can always get different cheaper capacitors if u wanted. I plugged in my speakers to the remaining 4 channels and they all work. Amp was sold to me without a power cord so you will need to get one. Any 14 gauge power cord will work. Kimber Kable PK14, Pangea Audio 14XL, PS Audio Perfectwave AC5 or AC10 are all great audiophile power cords that will sound great with this amp. Again you will need a power cord for the Parasound amp as it DOES NOT come with one.Specs on amp:Circuitry designed by John CurlTHX Ultra-certifiedDirect Coupled -- no capacitors or inductors in signal pathDC Servo and relay protection circuitsHigh bias Class A/AB operation1.6 kVA Toroid power transformer with independent secondary windings for each channel, 100,000 F power supply filter capacitanceIndependent power supplies for each channelInput stages use hand matched complementary JFETs30 beta-matched 15 amp, 50 MHz bipolar output transistorAC present, standby/normal, current overload indicatorsRear mounted gain controls and rear handles12 volt DC automatic turn-on circuitry; ground lift switch Tiffany-style RCA input jacksGold-plated 5 way speaker binding postsCustom designed removable IEC AC cord3 rack space height front panelRack mounting adapter availableSPECIFICATIONSContinuous Power Output - Each Channel:140 watts RMS x 5, 20 Hz - 20 kHz, 8 ; 200 watts RMS x 5, 20 Hz - 20 kHz, 4 Current Capacity:45 amperes peak per channelSlew Rate:130 V/secondPower Bandwith: 5 Hz - 100 kHz, +0/-3 dB at 1 wattTotal Harmonic Distortion:< 0.03 % at full power; < 0.01 % typical levelsIM Distortion:< 0.03 %S/N Ratio:> 117 dB, full power; > 96 dB, THX Reference LevelDamping Factor:> 800 at 20 Hz Power Consumption: 1500 wattsDimensions: w 17 1/4" x h 5 1/4" x d 19", h 6" with feetNet Weight: 46 lb.
- Posted on: 2015-04-15 20:05:36
- Classified ad views:
- Item ID: 11651663